Clearing Values From Memory; Important Notes Regarding Your Blood Pressure Measurement; Care, Maintenance & Cleaning - HoMedics LEADER LDRBPS-060 Manual

CLEARING VALUES FROM MEMORY

Press and hold the date & time set buttons(
at the same time while in memory mode and the data will
be erased automatically.
IMPORTANT NOTES REGARDING YOUR BLOOD
PRESSURE MEASUREMENT
• T ake your reading in a comfortable environment as
measurements can be affected by hot or cold tem-
peratures. Take your blood pressure at normal body
temperature.
• D o not move or talk during measurement as this can
elevate readings.
• D o not move or cross legs during measurement.
Keep feet flat on floor.
• D o not touch cuff or monitor during measurement
procedure.
23
• I t is suggested that you take your measurements
at the same time each day and use the same arm for
) consistency.
• U sers should wait a minimum of 5 minutes before tak-
ing additional measurements. More time may be nec-
essary depending upon your physiology.
• The measurement results that users receive are
for reference only. If users have any blood pressure
concerns, please consult a physician.
• Once inflation reaches 300 mmHg, the unit will
deflate automatically for safety reasons.
• This device may have difficulty determining the
proper blood pressure for users with irregular
heartbeat, diabetes, poor circulation of blood, kid-
ney problems, or for users who have suffered a
stroke.
CARE, MAINTENANCE & CLEANING
1. Do not disconnect the tubing or remove the
inflation bulb from the arm cuff.
2. Clean the blood pressure monitor body and cuff care-
fully with a slightly damp, soft cloth. Do not press. Do
not wash cuff or use chemical cleaner on it. Never use
thinner, alcohol or petrol (gasoline) as cleaner.
24