HoMedics LEADER LDRBPS-060 Manual page 14

Semi-automatic blood pressure monitor
Table of Contents

Advertisement

Available languages

Available languages

3. Leaky batteries can damage the unit. Remove the
batteries when the unit will not be used for
a long time.
4. If the unit is stored near freezing, allow it to
acclimate to room temperature before use.
5. T his blood pressure monitor is not field serviceable.
You should not use any tool to open the device nor
should you attempt to adjust anything inside the
device. If you have any problems with this device,
please contact HoMedics Consumer Relations (con-
tact information can be found on the warranty page).
6. Do not immerse the unit in water as this will result in
damage to the unit.
7. Do not subject the monitor and cuff to extreme tem-
peratures, humidity, moisture, and direct sunlight.
Protect from dust.
8. Do not fold the cuff and tubing tightly.
9. Do not disassemble the monitor or cuff. If in need of
repair, refer to the warranty section of this manual.
25
10. Do not subject the monitor to extreme shocks (do
not drop on floor).
11. Do not inflate the cuff unless wrapped around arm.
12. Do not wrap the cuff around body parts other
than your arm.
13. To avoid accidental strangulation, keep this
product away from children and do not drape
tube around neck.
14. Do not drop or insert any object into any opening
or hose.
15. T his monitor may not meet its performance
specifications if stored or used outside of these
temperature and humidity ranges:
• Storage Environment • Operating Environment
Temperature:
-4°F~158°F (-20°C~70°C)
Humidity:
Less than 90% R.H.
Temperature:
50°F~104°F (10°C ~40°C)
Humidity:
15~90% R.H.
26

Advertisement

Chapters

Table of Contents
loading

Table of Contents