Installing The Printer Software - Star Micronics TSP100 Hardware Manual

Note: The dialog shown below may appear on your PC
screen if your PC is running Windows 98 or Me,
and if you turn ON the power of the printer for the
first time while the PC and the printer are con-
nected with the USB/PoweredUSB cable. In this
case, refer to the software manual on the CD-
ROM, in the following directory: Documents folder.

3-5. Installing the Printer Software

Here is the procedure for installing the printer driver and utility software, which are stored on the
supplied CD-ROM.
The procedure applies to the Windows operating systems shown below. For instructions on the
Linux and Macintosh OS X, refer to the software manual located in the "Linux" and "Mac"
folders on the CD-ROM.
· Windows 98 SE
· Windows Me
(1) Turn ON the power to your PC to start Windows.
(2) Insert the supplied CD-ROM (Drivers and Utilities)
into the CD-ROM drive.
(3) Follow the instructions that appear on the screen.
(4) The dialog shown in the illustration indicates that the
procedure has been completed. Click "OK".
The dialog that appears on the screen varies with your system. This completes the installation of
the printer software. A message will appear, prompting you to restart. Restart Windows.
· Windows 2000
· Windows XP
– 14 –