Specifications; General Specifications - Star Micronics TSP100 Hardware Manual

10-1. General Specifications

(1) Printing method
(2) Print speed
(3) Dot density
(4) Printing width
(5) Roll paper
(6) Overall dimension
(7) Weight
(8) Noise Approx.

10. Specifications

Direct line thermal printing
Max. 1000 dots/sec. (125 mm/sec.)
203 dpi: 8 dots/mm (0.125 mm/dot)
Max. 72 mm
Refer to chapter 5 for details on the recommended roll paper.
Paper width:79.5±0.5 mm (57.5±0.5 mm when the paper roll
holder is used)
Roll diameter: ø83 mm or less
142 (W) × 204 (D) × 132 (H) mm
Auto cutter model : 1.72 kg (without roll paper)
Tear bar model : 1.56 kg (without roll paper)
U Model
49 dB (Auto cutter model)
48 dB (Tear bar model)
PU Model
50 dB (Auto cutter model)
50 dB (Tear bar model)
Note: The noise measurements listed above were obtained
according to conditions established by this company. The
noise measurements may vary depending on the type of
paper used, type of printing, operating environment, and
power consumption mode.
142 mm
– 32 –
132 mm