Charging the monitor
When the monitor battery is low, the monitor alerts you with two beeps and blue blinks every 5 seconds.
If the low battery alert sounds, charge the monitor immediately.
Charging time: 2 hours
• While charging, the blue light
on the monitor will blink.
• Once fully charged, the blue
light will remain solidly lit.
If you are using Strips
1. Remove the Strip from your chest, then remove the monitor from the Strip.
2. Plug the charging cord into the monitor. Ensure the other end is plugged
into a wall outlet.
As soon as the monitor is fully charged, use a new Strip to re-apply
BodyGuardian Mini to your chest. See pages 6-11 for instructions.
If you are using an ECG lead set
If you are using an ECG lead set:
1. Remove electrodes from your chest, then remove the monitor from lead set.
2. Plug the charging cord into the monitor. Ensure the other end is plugged
into a wall outlet.
As soon as the monitor is fully charged, use new electrodes to re-apply
BodyGuardian Mini to your chest. See pages 12-15 for instructions.
DAILY USAGE
17