Preventice Solutions BodyGuardian MINI Patient Instruction Manual page 15

for patients using an ECG LEAD SET
Turn on monitor
Press and release the center button
If contact between the Strip and your skin is satisfactory:
The monitor makes a quick series of three rising beeps and the green light blinks every 5 seconds. You are
successfully monitoring.
If contact between the ECG lead set and your skin is NOT satisfactory:
The monitor alerts you with two beeps every second. If this occurs:
1. Power off the monitor by pressing and holding the center button
monitor makes three monotone beeps as it powers off.
2. Revisit the previous steps in this manual to ensure that:
• The monitor and leads are securely attached to the ECG electrodes (page 13).
• BodyGuardian Mini is properly placed and securely adhered to your chest (page 14).
3. Power on the monitor by pressing and releasing the center button
• If the monitor does not beep continuously, you are successfully monitoring.
• If the monitor beeps twice every second, remove the electrodes, use new electrodes, and begin again on
page 12.
on the monitor once.
GETTING STARTED
on the monitor for 3 seconds. The
on the monitor once.
15