Turn on monitor
Press and release the center button
If contact between the Strip and your skin is satisfactory:
The monitor makes a quick series of three rising beeps and the green light blinks every 5 seconds. You are
successfully monitoring.
If contact between the Strip and your skin is NOT satisfactory:
The monitor alerts you with two beeps every second. If this occurs:
1. Power off the monitor by pressing and holding the center button
monitor makes three monotone beeps as it powers off.
2. Revisit the previous steps in this manual to ensure that:
• The monitor is securely attached to the Strip (page 7).
• BodyGuardian Mini is properly placed and securely adhered to your chest (pages 9-10).
3. Power on the monitor by pressing and releasing the center button
• If the monitor does not beep continuously, you are successfully monitoring.
• If the monitor beeps twice every second, remove the Strip, use a new Strip, and begin again on page 6.
for patients using STRIPS
on the monitor once.
GETTING STARTED
on the monitor for 3 seconds. The
on the monitor once.
11