Charging The Monitor - Preventice Solutions BodyGuardian MINI Patient Instruction Manual

DAILY USAGE

Charging the monitor

When the monitor battery is low, the monitor alerts you with two beeps and blue blinks every 5 seconds.
If the low battery alert sounds, charge the monitor immediately.
Do not use your own personal device chargers. Only use the charger(s) provided to charge Preventice devices.
Charge time: 2-3 hours
While charging, the blue
light on the monitor will blink.
Once fully charged, the blue
light will remain solidly lit.
18
1. Remove the Strip or electrodes from your chest, then remove the monitor.
2. Plug the charging cord into the monitor. Ensure the other end of the cord is
plugged into a wall outlet.
As soon as the monitor is fully charged, use a new Strip or new electrodes
to re-apply BodyGuardian Mini to your chest.
• If you are using Strips, see pages 6-11 for instructions.
• If you are using an ECG lead set, see pages 12-16 for instructions.
Important
front view
Ensure the micro-USB
connector is oriented
this way when inserting
into the monitor.
side view