Loading Paper; Loading New Roll Paper - Star Micronics TSP2000 Series User Manual

5-1. Loading New Roll Paper

(1) Pull the lever toward you to open the printer cover.
Note: Make sure that the lever is pulled until it stops at the stopper. If the lever
is not pulled up to the stopper, the printer cover may not open.
(2) Peel the adhesive end off the paper.
Note: Make sure that the entire adhesive area is removed, since no printing
can be performed on that area.
(3) Position the paper in the direction as shown below and place it into the paper
holder gently.
Paper holder
Note 1: Make sure that the paper is not deformed. If a roll paper like those
shown below is used, a malfunction may result.
Note 2: If the paper sags as shown below after it has been loaded into the
paper holder, make the paper taut.

5. Loading Paper

– 11 –