Product Information; Intended Use; Areas Of Use - Viega 8326.1 Instructions For Use Manual

2 Product information

2.1

Intended use

2.1.1

Areas of use

Suitable cisterns
Flush plate Visign for Public 1
The flush plate is intended for the actuation of flushes on Viega con-
cealed cisterns.
Installation is only possible in the following Viega concealed cisterns:
Cistern model 2H
n
Cistern model 2L
n
Ascertain which model is installed before mounting. The following infor-
mation will help you to determine the model of the cistern installed:
Cistern 2H
The revision shaft of this cistern is found at a height of approx. 1 metre
on the front.
Cistern 2L
The revision shaft of this cistern is either found at a height of approx.
75 cm on the front or on the top.
Product information
6 from 20