Commissioning; Setting The Flush; Error, Faults And Remedy - Viega 8326.1 Instructions For Use Manual

3.3

Commissioning

3.3.1

Setting the flush

3.4

Error, faults and remedy

Error
WC does not flush
WC flush runs through
Flush plate Visign for Public 1
Mount holding plates and basic panels.
Mount and screw flush plate tight.
Set the flush volume on the drain valve of the cistern.
Large flush volume: approx. 6–9 litres
Cause
Cistern is not yet completely full
No water in cistern, corner valve is
closed
Dirty seal in filling valve
Remedy
Wait until the cistern is sufficiently
full
Open corner valve
Check seal, replace if necessary
Handling
19 from 20