Net Time Mode (Default Setting); Lcd Explanations - TAG Heuer CHRONOPRINTER 520 Operating Instructions Manual

Registration of start and finish times with competitor N° 's (alpine ski, cross-country, rally, etc). If your device
is not in NET TIME mode (see the timing sleeve), we advise you to configure it now:
When the display indicates ENTER TIME FOR SYNCHRO, press F.
Select TIMING MODE and confirm with # ; select NET TIME and confirm with #.
Select the desired precision for the net time result (ex. 1/100
programmable in the chapter 9 – TECHNICAL SPECIFCATIONS).
Select your needed numbering mode at the start (NUMBERING):
AUTOMATIC UP this option automatically presents bib numbers at the start in sequential order, or
MANUAL if race start numbers will appear in random order.
Proceed to the synchronization ( see point point 3.4 ).
CAUTION !
4.1 LCD explanations in NET TIME mode
In this example, the CP 520 is in NET TIME MODE – AUTOMATIC UP.
The display indicates:
- - - 1 1 : 2 3 : 4 5
1 < < < <
2 1 1 : 5 2 : 2 2
2 < < < <
1 > > > >
2 1 1 : 5 3 : 1 4
3 < < < <
2 > > > >
1 <
4.

NET TIME MODE (default setting)

If the synchronization (SYNCHRO) has been carried out before the Timing
mode selection, you must create a NEW RUN in the menu F.
- - -
> > > >
A U T
> > > >
1
2 5 . 8
A U T
> > > >
2
1 4 . 5
1 > 1 : 1 8 . 5 2
Explanations:
- External inputs blocked and time-of-day
Bib N° 1 ready to start
-
- External inputs unblocked
(Run 2 / automatic mode)
-
Bib N° 1 started and expected at the finish
with running time
-
Bib N° 2 ready to start
- Bib N° 2 started and expected at the finish
with running time
-
Bib N° 3 ready to start
-
Finish of bib N° 1 with actual ranking
Page 6
th
for Alpine Ski – refer to definition