TAG Heuer CHRONOPRINTER 520 Operating Instructions Manual page 18

To insert a new paper roll:
To extract a paper roll partially started:
7. CHANGING THE PAPER ROLL (continued)
Unroll a few centimeters of paper until its surface is
clean. Cut it perpendicularly.
Put the paper roll at the back of the device (See
drawing). Introduce the paper under the cylindrical
paper driver. Maintain a light pressure on the paper,
press the paper feed (↑ ↑ ↑ ↑ ). Ensure a good guidance of
the paper. Put the paper roll in its compartment and
strongly push it downwards. You will feel a click as
soon as the paper roll will find its housing.
Turn the paper roll to release a little bit of paper.
Extract 3 to 4 cm of paper.
Firmly hold the unrolled paper with your index finger
and thumbs on each side. Pull it vertically
Page 18