Changing Of The Paper Roll - TAG Heuer CHRONOPRINTER 520 Operating Instructions Manual

Table of Contents

Advertisement

It is very easy to change it as long as you use it until the end (capacity of approximately 5000 times). A
red zone announces the end of paper.
The change can also be carried out during the timing (even in emergency when there is no more paper)
as the times memorized during the replacement are going to be printed on the new paper roll.
Before the end of the paper
the change is carried out, don't forget to put again the PRINTER in ON position.
When there is no more paper
However, we advise you to change the paper roll before your timing!
Open the paper compartment
To open the paper compartment, you can help you with your thumbs to slide it at the back of the device.
To slide it back, place the cover well flat, 3÷4mm behind its closing position.
Caution!
To remove a finished paper roll:
7.
CHANGING THE PAPER ROLL
Enter the MENU, select PRINTER in OFF position. As soon as
The printer is automatically switched off.
It will print again automatically as soon as the new paper roll will
be in place. We recommend the first method.
The paper roll is firmly maintained by two lateral " half-moons "
to prevent that this one does not move or unwind itself.
Pull out the central part of the paper roll backwards to extract it
as well as the paper that is still engaged in the printer.
Page 17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents