Specific Rally Timing Modes 3.1. Starter Marshall (mode A) 3.2. Time Check (mode B) 3.3. Stage Timer (mode C) Recommendations Download a new version of Firmware Technical specification 6.1. Pocket Pro characteristics 6.2. USB Connector Quick Guide Notes Page 2 TAG Heuer Timing...
(HL615, HL675). Pocket Pro Manager adjusts a Lock Time for the USB Input. Note: Pressing the hard reset (to the right of the USB connector) resets the Lock Time value to 0.01 sec (minium) Page 3 TAG Heuer Timing...
During charge: 75% ON / 25% OFF blinking Fully charged: with USB Cable: icon ON Without USB cable: icon OFF Low level (<10% charge): blinking 50% ON & 50% OFF (you still have 2-3 days autonomy) Page 4 TAG Heuer Timing...
Validate your setting with the MODE button (SET icon is OFF) 1. Icon Set ON = Setting 2. Date setting (in red, digit blinking) (25.03) 3. Year setting (2013) 4. Time of the Pocket Pro (setting in menu TIME) Page 5 TAG Heuer Timing...
) by pressing MEMORY button. For simple viewing in this mode, it is possible to reduce the information, and display only SPLIT or LAP. For this, during the race, press the button MODE. MODE MODE MODE Page 6 TAG Heuer Timing...
The Pocket Pro will restart automatically from the pre-defined time of the count-down. The timer will run and show the full time since the first Start. To stop the sequence, you have to RESET the Pocket Pro. START/STOP SPLIT/LAP START/STOP Page 7 TAG Heuer Timing...
The time of day of the Pocket Pro will be displayed on the top of the LCD with 1 minute in advance. The synchro will be automatic at the end of the full minute 2.6.3. To Synchronise at Zero Press START/STOP button The Chrono automatically starts from zero. Page 8 TAG Heuer Timing...
To memorize the time of day, press SPLIT/LAP button The time on the LCD will stay and the passing counter (top-left) is incremented. To see the time of the day running, press MEMORY button. Page 9 TAG Heuer Timing...
The user has the ability to make an unlimited number of split times as needed. The internal memory stores the actual start time and stage time for every stage. Page 10 TAG Heuer Timing...
Button Mode Allows you to change the interval between each start (intervals available are 1, 2, and 4 minutes) and move to automatic starts on your selected start delay Page 11 TAG Heuer Timing...
Page 12
After 30 seconds, the count-down sequence for the next competitor starts automatically Shown: count-down is currently at 1’29 sec Recall (button Memory) Scheduled start time for the Sequence competitor sequence n°001 N° Gap with scheduled start time (+0.18 sec) Page 12 TAG Heuer Timing...
A second press Start/Stop button will revert back to running time “fly back”, meaning the running time continues without interruption allowing you to see a split time (not memorized). Page 13 TAG Heuer Timing...
Page 14
Time of day: 16:19:19 Stage Count down: 41 sec Running time: 39’19’’ Button SPLIT/LAP : 5 seconds Change the stage to (n°2) Setting next stage count-down: 40 sec Start setting : 1:00 = full minute Page 14 TAG Heuer Timing...
This can be used as many times as needed but these times are NOT stored in memory. Once you have viewed the split time simply re-press the Start/Stop button to return to the running clock Page 15 TAG Heuer Timing...
Page 16
4. Net time for the stage When the stage = 000, you will get the cumulative time for all stages completed 1. Stage = 000 : Global over view 2. Total time for all stages completed (hh :mm :ss) Page 16 TAG Heuer Timing...
Page 17
Time of day: 11:09:51 Net time: 54’51.18’’ Button SPLIT/LAP Store Stage time for stage n° 001 Time of day : 11:27:32 Increment to stage (n° 002) Select start interval for next count-down : 1:00 = Full minute Page 17 TAG Heuer Timing...
The Pocket Pro can overheat in excessive direct sunlight. The LCD Plexiglas is fragile. It is not recommended to clean it with a solvent or alcohol IMPORTANT A slightly damp cloth is recommended for cleaning the Pocket Pro Page 18 TAG Heuer Timing...
Download a new version of Firmware Program downloads and new releases of the TAG Heuer firmware “up loader” are available free of charge on our website www.tagheuer-timing.com. For this operation, you need to have: • Mini-USB cable HL545-3 • The software «TAGHeuerFirmmanager.exe » version minimum V10.0 Procedure •...
LCD 3 lines of 6 characters Battery level / Timing Mode Size of characters 7mm height Accuracy 1/100 second Memory 800 stored times Temperature range –20°C to +60°C 6.2. USB Connector Description TAG Heuer Photocell Page 20 TAG Heuer Timing...
Button: Mode: Select single Count Down or Multi Count Down (CD blinking) Time (function manual back-up with Time-of-Day) Button: Start/Stop + Split/Lap: Set Time-of-Day (+ 1 minutes) Button: Start/Stop: Synchro + Start Button: Split/Lap: Memorize Time-of-Day Button: Memory: recall/view memorized time Page 21 TAG Heuer Timing...
Page 22
Mode C Button : Split/Lap (before a start) Modify the count-down for the next start Button: Start/Stop: Start / Stop count-down Button : Split/Lap (after a finish) Increment stage no. Button : Memory View previous stages Page 22 TAG Heuer Timing...
Need help?
Do you have a question about the POCKET PRO HL400-R RALLY and is the answer not in the manual?
Questions and answers