Table of Contents
Advertisement
Memorized information
The CP 520 is equipped with a small accumulator in order to save memorized information even if you
temporarily extract the batteries.
It is recommended to leave batteries in the CP 520 if you wish to save information in memory.
If the accumulator is partially or completely discharged, it is possible that the Chronoprinter does not
work correctly any more, in this case, use the " RESET" function described below.
To recharge a discharged accumulator, it is necessary to leave the CP 520 working during 14 hours with
its internal batteries or external power supply.
This can happen after having removed the batteries for a long period. When you will switch the CP 520
on, all default settings are memorized.
Special functions
To reset the CP 520, press on key 0 when you switch the device on.
Page 20
Hide quick links:
Advertisement
Table of Contents
