Table of Contents
Advertisement
Press F to enter in the menu,.
To select the desired menu, move by using the M and L, then, confirm with #. Read the LCD!
POWER OFF
TIMING MODE
DIRECT RANKING
RANKING RUN Nr.
DUPLICATE
INSERT TIME
NEW RUN
PRINTER
CLEAR MEMORY
DOWNLOAD
6.
DESCRIPTION DU MENU
Switch off the device.
Select the timing mode and the precision:
NET TIME
For starts and finishes (alpine ski, rally, cross-country,
etc).
REAL TIME
for the sequential modes (parallel slalom), starts and
finishes (autocross) as well as the lap time.
See the menu structure on page 16 and the technical specifications of
chapter 8, page 20.
A direct ranking of the current RUN can be obtained any time during the
race.
Ranking of a RUN or by addition of two RUNS.
Recall of a bib N° to duplicate one or several other(s) competitor(s) at its
start or finish time (START N° / FINISH N° ).
Same principle as for the MASS START.
Insert a start or a finish time for a bib N° .
Creation of a new RUN.
(When or if the previous RUN is finished)
Printer ON or OFF.
Clear the memory or check the remaining memory capacity.
When you start a timing and you don't need to keep preceding runs in
memory, you can make a CLEAR MEMORY (this option is possible before
or after synchronization).
Download of one or of all memorized RUNS to the printer (take care at the
paper roll capacity) or to a PC (OUTPUT COMPUTER – in OFF LINE
mode).
Page 14
Hide quick links:
Advertisement
Table of Contents
