Stihl TS 420 Manual page 73

2
: Insert the long screw (1) in the
hole (arrow) and tighten it down.
: Insert and tighten down the
screw (2).
Support foot
– Remove the filter cover, b 12.1.
: Remove the screw (arrow).
– Lift the air baffle (1).
72
1
1
: Pull the support foot (1) out of the
air baffle and remove it from the
retainers (arrows).
– Examine the support foot,
replace if necessary.
1
1
: Push the support foot (1) into the
air baffle and into the lateral
guide on the tank housing
(arrows).
– Then press the support foot (1)
into the retainers.
– Slide the air baffle (1) into
position in the mount.
: Insert and tighten down the screw
(arrow).
– Reassemble remaining parts in
reverse order.
– Tightening torques, b 3.5.
TS 410, TS 420
1