Table of Contents
Advertisement
CHAPTER 3
GETTING STARTED
WITH SD-lo/l5
You have assembled and tested your printer, and seen a quick
sample of SD-10/15's capabilities in the self-test. Now it's time
to do what you bought SD-lo/l5
to do: print information
from
your computer.
But first you need to connect
SD-lo/l5
to your computer.
Figure 3-l shows where the cables connect, but there's more that
you need to know complete instructions
for connecting SD- lo/ 15
to many popular computers
are given in the appendix. Find the
appendix that covers your computer and follow the instructions
for connecting
SD- 10/l 5. If your computer
isn't listed in the
appendix, then ask your Star dealer which computer that is listed
is most like yours. If none of the listed computers
are similar to
yours, then your Star dealer will give you advice on connecting
SD- 1 O/ 15 to your computer.
When everything is connected, come back here and we will check
it out!
Interface
connector
lip
Figure 3-l.
SD-lo/l5
has parallel interface as standard.
Advertisement
Table of Contents
