Program System Parameters; Program Account & Password; Set All Memory To Factory Defaults; Select Number For Program Function Required - Select Engineered Systems SAT3 User Manual

SAT3 Programmer: Programming Options
TO PROGRAM SYSTEM PARAMETERS (MENU 4)
Press 4
Display will show: SYSTEM CONTROL

Select number for program function required.

1 – TALK TIME = 1
2 - ACK TONE = 0
3 - RING DOWN = 0
4 - RING TIME X10 = 4
5 - PAUSE TIME = 2
TO PROGRAM ACCOUNT AND PASSWORD (MENU 5)
Press 5
Display will show: ACCOUNT & PSWD
Select number for program function required.
1 - ACCOUNT = 1234
2 – ZONE = 0000
3 - CYCLE TIME X10 = 0
4 - ACCOUNT CONFIRM = 0
5 - PASW = 7777
MEMORY INITIALIZATION/REPROGRAMMING (MENU 9)
Press 9
Display will show: 1 = IN, 7 = SD, 8 = GT
Select number for program function required.
1 - SET ALL MEMORY PARAMETERS BACK TO FACTORY DEFAULTS
Display will show: INIT MEMORY 1+*
Press 1* and all SAT3 setting return to factory parameters and all stored phone numbers are erased.
7 - SEND DATA TO SAT3
Display will show: SEND ALL MEM 1+*
Press 1* and all settings in SAT3 programmer will be sent to the SAT3 product.
8 - GET DATA FROM SAT3
Display will show: GET ALL MEM 1+*
Press 1* and all settings stored in SAT3 product will be sent to the SAT3 programmer.
These are factory default settings.
For more information refer to Pg 6-12 in the
SAT3R Manual, or your SAT3 product manual.
These are factory default settings.
For more information refer to Pg 6-9 in the
SAT3R Manual, or your SAT3 product manual.
Pg 6