Hookup Connections - Select Engineered Systems SAT3 User Manual

SAT3 Programmer: Hookup Connections
WARNING:
RJ-11 phone cables from SAT3 product
BEFORE connecting SAT3 Program-
mer RJ-45cabling.
It may damage the SAT3 product and
WILL void the Warranty.
Open up the SAT3 face plate to expose
the RJ-45 jack on the upper right side
of the SAT3.
Remove the supplied RJ-45 7-foot
CAT5e patch cable from its package
and connect one end to the SAT3
RJ-45 jack.
WARNING:
RJ-11 phone cables from SAT3 product
BEFORE connecting SAT3 Program-
mer RJ-45cabling.
It may damage the SAT3 product and
WILL void the Warranty.
Do NOT connect the other end of the
RJ-45 patch cable to the
SAT3 Programmer at this time.
(Shown connected only for purposes of
illustration.)
Proceed to the instructions on the next
page.
Pg 3
Disconnect any and all
Disconnect any and all