Command Summary - Star Micronics Multi-Font NX-2410 User Manual

COMMAND SUMMARY
MODE CONTROL CODE FUNCTION
IBM
Std.
Std.
IBM
Std.
IBM
Std.
Std.
IBM
IBM
<BEL> Bell
CBS>
Backspace
<HT> Horizontal tab
<LF>
Line feed
<VT>
Vertical tab
<FF>
Form feed
<CR>
Carriage return
<so>
<SI>
Expanded printing for one line
Condensed printing
<DC]>
<DC2>
<DC2>
Set printer on-line
Cancel condensed printing
Pica pitch
<DC3>
<DC42
<CAN>
Set printer off-line
Cancel one-line expanded printing
Cancel last line
<ESC> <LF>
<ESC> <FF>
<ESC> <SO>
Reverse line feed
Return to top of current page
Expanded print for one line
<ESC> <SI>
<ESC> <EM> <O>
Condensed printing
Manual feed
<ESC> <EM> <4>
<ESC> <EM > "R"
<ESC> <EM> "T"n
<ESC> ("I,,
< ESC > "!" n
< ESC > "#"
< ESC > "S" nl n2
Auto feed
Eject paper from ASF
Set print start position on ASF
Increase character spacing
Select master print mode
Accept MSB as is
Absolute horizontal tab in inches
<ESC> "%" <(I>
Select ROM character set
<ESC> "%" < 1 >
Select download character set
< ESC > "%" "0"
Select ROM character set
< ESC > "%" "1"
Select download character set
<ESC> "&" CO> nln2mOmlm2dld2....
< ESC 1 "*" n0 nl n2 ml m2 ..,.
<ESC> "+"n
Define download characters
Select graphics mode
Set line spacing to n/360 inch
<ESC> "-" <O>
<ESC> "-" <l>
< ESC > " - 7, "0"
< ESC > "-" "1"
< ESC > "1" n0
Stop underlining
Start underlining
Stop underlining
Start underlining
Select vertical tab channel
< ESC > "0"
< ESC > "I"
Set line spacing to l/8 inch
Set line spacing to 7/60 or 7/72 inch
<ESC> "2"
<ESC> "2"
< ESC > "3" n
<ESC> "4"
Execute <ESC> "A"
Set line spacing to l/6 inch
Set line spacing to n/l80 or n/216 inch
Set top of page at current position
<ESC> "4"
< ESC > "5"
<ESC > "5" <O>
< ESC > "5" < 1 >
<ESC> "6"
< ESC > "7"
Select italic characters
Select upright characters
Cancel automatic line feed
Set automatic line feed
Select character set #2
Select character set #I
108