Star Micronics Multi-Font NX-2410 User Manual page 67

Select upright characters
Mode ASCII
Decimal Hexadecimal
Std.
<ESC> " " 5
27 53 1B 35
IBM
< FS > " " 5
28 53 1c 35
Stops italic printing and causes subsequent characters to be printed up-
right. Ignored if the printer was set to stay in panel style at power-on.
Emphasized printing
Mode ASCII
Decimal
Hexadecimal
Both <ESC> "E"
27 69 1B 45
Causes subsequent characters to be emphasized by adding extra thickness
to vertical strokes.
Cancel emphasized printing
Mode ASCII
Both <ESC> "F"
Cancels emphasized printing.
Double-strike printing
Decimal
Hexadecimal
27 70 1B 46
Mode ASCII
Decimal
Hexadecimal
Both <ESC> "Cl"
27 71
IB 47
Causes subsequent characters to be printed in double-strike mode with
a slight vertical paper motion in between, causing a thickening of hori-
zontal strokes. For bold print, use of double-strike is recommended in
LQ mode, and combined use of emphasized and double-strike is recom-
mended in draft mode. Double-strike cannot be used with superscripts
or subscripts.
Cancel double-strike printing
Mode ASCII Decimal
Hexadecimal
Both
<ESC> "H "
27 72 1B 48
Cancels double-strike printing.
Start underlining
Mode ASCII
Decimal
Hexadecimal
< ESC > "-" " 1" 27 45 49 1B 2D 31
Both
< ESC > "-" <I> 27 45 1 1B 2D 01
Causes subsequent characters to be underlined. IBM block graphics
characters and spaces skipped by horizontal tabulation are not underlined.