Star Micronics Multi-Font NX-2410 User Manual page 80

Set page Iength to n inches
Mode
ASCII
Decimal Hexadecimal
Both <ESC> "C" co> n
27 67 0 n
1B 43 00 n
Sets the page length to n inches, where n is between 1 and 22 in Standard
mode or between 1 and 127 in IBM mode. The current line becomes the
top of the page.
Set
fop margin
Mode ASCII Decimal Hexadecimal
Both <ESC>
"C"
n 21 99 n IB 63 n
Sets
the top margin to n lines, where
n
is between 1 and 255. Printing
begins on the
(n
+ 1)th line on the page.
Set bottom margin
Mode ASCII Decimal Hexadecimal
Both
<ESC>
"N" n
27 78
n
lB4E n
Sets the bottom margin to
n
lines, where
n
is between 1 and 127 in Standard
mode or between 1 and 255 in IBM mode. The bottom margin is reset
when you change the page length.
Cancel top and bottom margins
Mode
ASCII
Decimal Hexadecimal
Both <ESC> "0"
21 79
1B 4F
Cancels both the top margin and the bottom margin.
Form feed
Mode
ASCII
Decimal Hexadecimal
Both t <FF> I 12 lot I
Feeds the paper to the top of the next page according to the current page
length, and moves the print position to the left margin. When the auto-
matic sheet feeder (ASF) is selected (DIP switch 1-4 is OFF), this com-
mand ejects the current page.
Return to top of current page
Mode ASCII
Decimal Hexadecimal
Both <ESC>
<FF> (27 12 (1B OC
I
Feeds the paper backward to the top of the current page. Ignored when
friction feed is used.
72