Download Character Commands - Star Micronics Multi-Font NX-2410 User Manual

Select graphics mode
Mode ASCII Decimal Hexadecimal
" " nl
27 91 103 nl
IBM
<ESC> "["
g
1B SB 67 nl
n2 m0 ml m2 n2 m0 ml m2... n2 m0 ml m2 .,.
Selects one of eight graphics modes depending
on the value of m(J and
prints dot graphics in this mode. The graphic image is (nl + nZ x 256)
- 1 dots wide. See <ESC> "K" (for &bit graphics) or < FS> "Z"
(for 24-bit graphics) for information
on ml, m2, . .
m0
Graphics mode
0 8-bit Single-density ( 60 dots per inch)
1 8-bit Double-density
(120 dots per inch)
2
&bit Double-density, double-speed
3
8-bit Quadruple-density (240 dots per inch)
8 24-bit Single-density ( 60 dots per inch)
9 24-bit Double-density
(120 dots per inch)
11 24-bit Triple-density (180 dots per inch)
12 24-bit Hex-density
(360 dots per inch)
Convert graphics density
Mode
ASCII
Decimal
Hexadecimal
Both
< ESC > "?" n
m
27 63 n m
1B 3F n
m
Converts graphics defined by subsequent < ESC > "K". < ESC > "L".
< ESC > "Y" or < ESC > "Z" commands to a density mode defined
by < ESC > "*". N is "K". "L"; "Y" or "Z". indicating the mode to be
converted.
m is a code from
< 0 > to < 4 > or < 6 > indicating one of
the modes of < ESC > "*".
DOWNLOAD CHARACTER COMMANDS
Copy character set from ROM into RAM card
Mode ASCII Decimal Hexadecimal
Std.
< ESC >
-:"
CO> n <O> 27 58
0 n 0 1B 3A 00 I? 00
IBM
< FS >
-:"
CO> n <O> 28 58
0 II OIC3A 00 /ZOO
Copies the selected character
set with n, as shown
below, to the corre-
sponding download character RAM card. overwriting any download data
already present. Ignored when DIP switch 2-l is ON.
n
Character set
L.
i.
0
Courier
2
Prestige
3
Orator
4 Script
L
81