Operation; Operating Media; Nozzles And Recoiling Forces - Frank FH 711 TCC Operating Instructions Manual

7.

Operation

7.1.

Operating media

7.1.1 Fuel oil
Use extra light fuel oil DIN 51603.
Other oils and contaminated fuel oil may not be used, since those may cause malfunctions
and inadmissible emission rates. The filter within the fuel oil inlet must not be removed.
7.1.2 Cleaning agents
Only the following FRANK chemicals and possibly certain other additional agents
authorized by the manufacturer may be used, since material compatibility can only
be guaranteed for these additional agents.
FRANK Cleaning agents
FRANKOCLEAN NER 0800
FRANKOCLEAN FZG 1070
FRANKOCLEAN FZG 1170
FRANKOCLEAN ALU 1020
FRANKOCLEAN LWB 1140
Observe the instructions for use of these cleaning agents. If necessary, wear pro-
tective glasses and safety clothing.
7.2

Nozzles and recoiling forces

When handling the safety spray lance be aware of the recoiling force and the fact
that a torque is created by the recoiling force when the spray lance is held at an
angle. The torque will increase with the length of the spray lance.
FRANKOCLEAN LMI 0480
FRANKOCLEAN WAX 0710
FRANKOCLEAN DEF 1040
FRANKOCLEAN AKO 1000
FRANKOCLEAN HRB 1150
34