Installation And Configuration; Mounting To Rack - Panasonic Switch-M5eGLPWR+ Series Installation Manual

3

Installation and Configuration

3.1 Mounting to rack

Use the supplied two 19-inch rack mount brackets and supplied eight screws (for fixing the
mount brackets to the Switching Hub) to fix the mount brackets to the four holes on each
side of the Switching Hub. Then securely install the Switching Hub on the rack using the
supplied four screws (for a 19-inch rack mount) or screws supplied with the rack.
Up to two Switching Hubs can be connected. When connecting two Switching Hubs and
installing them on a rack, use the supplied two 19-inch rack mount brackets and eight screws
(for fixing the mount brackets to the Switching Hub) to fix the mount brackets to the four
holes on a side of the Switching Hubs. Then use the supplied two connection brackets and
eight screws (for fixing the connection brackets) to securely fix the connection brackets to
the connection screw holes on the front and back panels, and then install the Switching Hubs
on the rack.
Right side
Left side
Front
Connection screw hole
 Installation on a rack (one unit)
 Installation on a rack (two units connected)
19-inch rack mount brackets
Screw holes for fixing the 19-inch rack mount brackets Screw holes for fixing the 19-inch rack mount brackets Screw holes for fixing the 19-inch rack mount brackets
19-inch rack mount brackets
Connection brackets
Connection screw hole
19-inch rack mount brackets
Back
Front
Front
Back
15