Insertion And Removal Guidelines; Visual Inspection; Insertion Guideline; Figure 16. Example Of Bent Contacts - Sierra Wireless AirPrime HL Series Customer Process Manuallines

6. Insertion and Removal Guidelines

6.1.

Visual Inspection

Prior to inserting the module, the operator should inspect the module and ensure that pins are not
deformed.
One typical failure is bent contacts; to avoid this, refer to section 6.4 for information regarding proper
handling of the Snap-in Socket.
Figure 16. Example of Bent Contacts
Note: Failure tends to happen on internal rows.
6.2.

Insertion Guideline

1. Check the alignment of the Polarity mark on both the module and the Snap-in socket.
4115102
Polarity mark on the module (black dot)
Rev 6.0
Polarity mark on the Snap-in socket (triangle)
June 15, 2017 27