Introducing Gimbal Control Modes - Zhiyun Evolution User Manual

Introducing Gimbal Control Modes

Pan
Following
Mode
Double Press MODE
Locking
Mode
Single Press MODE
Mode Switch Schematic Figure
Tilt Axis
Roll Axis
Pan Axis
P a n F o l l o w i n g M o d e : T h e
camera pans left/right following
the movement of the stabilizer
while the tilt and roll axes are
locked. Push the joystick up/down
allows manual control of the tilt
axis.
11 zhiyun-tech.com
Mode switch:
The stabilizer enters Pan Following Mode by default each
time when powered on. Switch into Locking Mode by single
pressing on the Joystick. Double press the Joystick to enter
the Following mode. Single press the Joystick under the
Following Mode will return to the previous mode.
Following
Mode
Roll Axis
Locking Mode: This mode locks
movement of all three axes to
keep the camera still and stable.
Push the joystick up/down and
left/right allows manual control of
the tilt axis and pan axis.
Tilt Axis
Roll Axis
Pan Axis
Following Mode: The camera
p a n s a n d t i l t s f o l l o w i n g t h e
m o v e m e n t o f t h e s t a b i l i z e r .
Push the joystick left/right allows
manual control of the roll axis.
Tilt Axis
Pan Axis