Assembly Instructions - Stamina Viper VG1500 Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at: parts@staminaproducts.com
FRONT
REAR
STEP 1
Attach the FOOT PLATE(4) to the BASE FRAME(1) with the SHAFT(42) and BUTTON HEAD BOLTS
(M6x1x10mm)(64).
STEP 2
Refer to the illustration. Bolt the BASE FRAME(1), REAR STABILIZER(2), and REAR SUPPORT(3) together
with HEX BOLTS(M12x1.75x110mm)(76), ARC WASHERS(M12)(78), and NYLOCK NUTS(M12x1.75)(82).
Do not tighten the bolts until STEP 3.
6