Stamina Viper VG1500 Owner's Manual page 10

ASSEMBLY INSTRUCTIONS
FRONT
REAR
STEP 12
Attach the SEAT FRAME(9) to the LOWER UPRIGHT(6) with HEX BOLTS(M12x1.75x100mm)(75),
WASHERS(M12)(80), and NYLOCK NUTS(M12x1.75)(82).
STEP 13
Attach the LEG LIFT(10) to the SEAT FRAME(9) with HEX BOLT(M12x1.75x90mm)(74), WASHERS
(M12)(80), and NYLOCK NUT(M12x1.75)(82).
STEP 14
Run the CABLE(45) through the slot in the LEG LIFT(10). Attach the CABLE(45) to the LEG LIFT(10) with
a PULLEY(43), a BOLT(M10x1.5x60mm)(69), two WASHERS(M10)(81), and a NYLOCK NUT(M10x1.5)
(83).
STEP 15
Refer to the illustration. Attach the ARM BRACE(16) to the LOWER UPRIGHT(6) with two HEX
BOLTS(M12x1.75x80mm)(73), a HEX BOLT(M12x1.75x70mm)(72), WASHERS(M12)(80), and NYLOCK
NUTS(M12x1.75)(82).
10