Table of Contents
Advertisement
OUTPUT VOL: The real time value of L1, L2 and L3 output voltage and frequency.
OUTPUT W: L1, L2 and L3 output power in watt.
OUTPUT VA: L1, L2 and L3 output power in VA.
OUTPUT W (%):L1, L2 and L3 output power watt in percentage.
OUTPUT VA (%):L1, L2 and L3 output power VA in percentage.
Total watt and VA: Total output load in watt and VA.
BATT Voltage/Bus Voltage/Charging Current/Discharging Current: The real time value of DC related
information.
Temperature: Temperature of L1, L2 and L3 phases.
Input current: The real-time value of input current in L1/L2/L3 and L12/L23/L13.
Output current: The real-time value of output current in L1/L2/L3 and L12/L23/L13.
3-3-4. Setting screen
This sub-menu is used to set the parameters of UPS. Touch the icon
There are 2 options: Basic and Advanced. Touch the icon
to go back to previous menu.
NOTE: Not all settings are available in every operation mode. If the setting is not available in present mode,
the LCD will keep its original setting parameter showed instead of changing the parameters.
20KVA
Bypass Mode
OUTPUT W
OUTPUT VA
L1:
4W
46VA
L2:
5W
46VA
L3:
1W
46VA
OUTPUT W(%)
OUTPUT VA(%)
L1:
0%
L2:
0%
L3:
0%
TOTAL W(%)
TOTAL VA(%)
0%
HOME
CONTROL
Measure screen page 2
20KVA
Bypass Mode
INPUT W
INPUT VA
4W
L1:
46VA
L2:
4W
46VA
L3:
4W
46VA
INPUT W(%)
INPUT VA(%)
L1:
0%
0%
L2:
0%
0%
L3:
0%
0%
TOTAL W(%)
TOTAL VA(%)
0%
0%
HOME
CONTROL
MEASURE
Measure screen page 3
BATT P VOL
BATT N VOL
BUS P VOL
BUS N VOL
CHARG CURR
0%
DISCHG CURR
0%
0%
TEMP L1
TEMP L2
0%
TEMP L3
MEASURE
SETTING
INPUT CURR
INPUT PF
L1: 0.3A
L2: 0.3A
L3: 0.3A
OUTPUT CURR
OUTPUT PF
L1: 0.3A
L2: 0.3A
L3: 0.3A
SETTING
INFO
to return to main screen. Touch the icon
14
19:52:36
2018-11-07
125.0V
125.0V
231.3V
229.5V
3.9A
0.0A
27
27
27
INFO
DATALOG
19:52:36
2018-11-07
0.08
0.08
0.08
0.08
0.08
0.08
DATALOG
to enter setting menu page.
Advertisement
Table of Contents
