Product Name: Velocity Harness Part #: 01700; 01701; 01702; 01703; 01704; 01705; 01706; 01750; 01751; 01752; 01753; 01754; 01755; 99-02-0041 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction Applicable Safety Standards...
This and any other included instructions must be made available to the user of the equipment. The user must understand how to safely and effectively use the Velocity Harness, and all fall safety equipment used in combination with the Velocity Harness.
Maximum 1 attachment per connection point. Personal Fall Arrest: Velocity Harness may be used to support a MAXIMUM 1 Personal Fall Arrest System (PFAS) for use in Fall Arrest applications. Structure must withstand loads applied in the directions permitted by the system of at least 5,000 lbs.
Compatibility: When making connections 5’ 2’ with Velocity Harness, eliminate all possibility *Eliminate Swing Fall whenever of roll-out. Roll-out occurs when interference possible! If Swing Fall exists, between a hook and the attachment point always account for additional 1.5’...
Velocity w/ PT Chest & TB Legs Installation and Use All PFAS equipment must be selected and deemed compatible with Velocity Harness by a Competent Person. ALWAYS follow all instructions of all equipment used in combination with Velocity Harness. NEVER attach connector to any place on harness other than D-ring. Connector gate must be self-closing and self-locking, and must withstand minimum load of 3,600 lbs.
Maintenance, Cleaning, and Storage If a Velocity Harness fails inspection in any way, immediately remove it from service, and contact Guardian to inquire about its return or repair.
Work area MUST be stable. At least every 12 months, a Competent Person other than the user must inspect Velocity Harness. Competent Person inspections MUST be recorded in inspection log in instruction manual and on equipment inspection grid label.
Safety Information Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, WARNING are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment.
INMEDIATAMIENTE quite de servicio si súbdito a una caída accessorio o si la falla la inspección. If equipment fails inspection Guardian Fall Protection IMMEDIATELY REMOVE FROM SERVICE 6305 S. 231st St. Kent, WA 98032 DO NOT REMOVE LABELS...
ANSI Z359.11 Annex A Note: This information from the Z359.11 standard is required to be included in the instruction manual for the end user: ANSI/ASSE Z359 Requirements for Proper Use and Maintenance of Full Body Harnesses (Note: These are general requirements and information provided by ANSI/ASSE Z359, the Manufacturer of this equipment may impose more stringent restrictions on the use of the products they manufacture, see the Manufacturer’s instructions.) 1.
Page 11
If the sternal attachment is used for fall arrest, the competent person evaluating the application should take measures to ensure that a fall can only occur feet first. This may include limiting the allowable free fall distance. It may be possible for a sternal attachment incorporated into an adjustment style chest strap to cause the chest strap to slide up and possibly choke the user during a fall, extraction, suspension, etc.
Need help?
Do you have a question about the Velocity Harness and is the answer not in the manual?
Questions and answers