Guardian 10917 User Manual
Hide thumbs Also See for 10917:

Advertisement

Quick Links

PART NUMBERS:
______ 10917/10918 50ft/65ft MK Galvanized Cable Retractable
______ 10927/10928 50ft/65ft MK HD Galvanized Cable Retractable
______ 10938/10938 50ft/65ft MK Stainless Steel Cable Retractable
______ 10964/10966 50ft/65ft DTA Galvanized Cable Retractable
Custom: ______________
R
e
t
r
a
c
R
e
t
r
a
c
DO NOT THROW AWAY THESE INSTRUCTIONS!
READ AND UNDERSTAND BEFORE USING EQUIPMENT!
This manual should be read and understood in its entirety, and used as part of a
training program as required by OSHA or any applicable state regulatory agency.
This and any other included instructions must be provided to the users of the
equipment. The user must understand the proper equipment use and limitations.
User must keep a copy of these instructions for reference and training.
This product meets all applicable OSHA and ANSI standards for fall protection.
T
R
A
I
N
I
N
G
R
E
Q
U
I
R
E
T
R
A
I
N
I
N
G
R
E
Q
U
I
R
E
program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to
minimize these hazards. Relevant Federal, State, and local regulatory requirements, procedures, and standards shall also be a part of training.
The employer shall ensure that each employee has been trained, as necessary, by a Competent or Qualified Person in the nature of fall hazards in the
work area, the correct erecting, maintaining, disassembling, and inspection of the fall protection systems being used, and the use of personal fall
arrest systems.
R
E
S
C
U
E
P
L
A
N
:
R
E
S
C
U
E
P
L
A
N
:
The user is required to have a rescue plan and the means at hand to implement it when using the equipment. The plan shall be
project specific. Employees shall be trained in self-rescue or alternate means shall be provided for prompt rescue in the event of a fall.
I
F
E
Q
U
I
P
M
E
N
T
I
S
S
U
I
F
E
Q
U
I
P
M
E
N
T
I
S
S
U
fall arrest. Contact your distributor or Guardian about policies regarding replacement of Guardian components involved in a fall.
I
N
S
P
E
C
T
I
O
N
:
I
N
S
P
E
C
T
I
O
N
:
Only the manufacturer of this equipment or persons or entities authorized in writing by the manufacturer shall make repairs to fall
protection equipment.
The date of first inspection should be recorded by the employer on the equipment, and any serial numbers shall be recorded on the
Inspection Log.
Formal inspections shall be made by either a Competent or Qualified Person on at least a semi-annual basis.
P
R
I
O
R
T
O
E
A
C
H
U
S
E
P
R
I
O
R
T
O
E
A
C
H
U
S
E
Fall protection equipment shall be inspected by the user for defects, damage, or deterioration.
Any suspected defective equipment shall be removed from service.
If the manufacturer's label is not legible or is missing, the equipment shall be removed from service. Fall protection equipment shall
be removed from service upon evidence of defects, damage, or deterioration, or upon expiration of the manufacturer's specified
service limits, whichever comes first.
t
a
b
l
e
L
i
f
e
l
i
n
e
s
t
a
b
l
e
L
i
f
e
l
i
n
e
s
M
E
N
T
S
:
M
E
N
T
S
:
The employer shall provide a training program for each employee who might be exposed to fall hazards. The
B
J
E
C
T
E
D
T
O
A
F
A
L
L
:
B
J
E
C
T
E
D
T
O
A
F
A
L
L
:
:
:
G
G
E
E
N
N
E
E
R
R
A
A
fall protection shall be made by a Competent Person. All fall protection
equipment shall be purchased new and unused.
The equipment is designed for use as a part of a personal fall protection system.
Components shall not be used for any other operation other than that which it has
been designed and approved.
Fall Arrest Systems shall be designed to comply with OSHA or applicable state
regulatory limitations. Systems must be used in a compliant manner.
Fall Restraint systems shall be designed by a Qualified Person, and must be
installed and used under the supervision of a competent
Consult a doctor if there is any reason to doubt a user's ability to withstand and
safely absorb fall arrest forces. Age, fitness, and health conditions can seriously
affect the worker should a fall occur. Pregnant women and minors should not
use this equipment.
D
D
O
O
N
N
O
O
T
T
:
:
Remove the equipment from service immediately if it has been subjected to the forces of a
G
u
a
r
d
i
a
n
F
a
l
l
P
r
o
t
e
c
t
i
G
u
a
r
d
i
a
n
F
a
l
l
P
r
o
t
e
c
t
8
8
0
0
0
0
-
-
4
4
6
6
6
6
-
-
6
6
3
3
8
8
5
5
w
w
w
w
w
w
.
.
g
g
u
u
a
a
r
r
L
L
S
S
Y
Y
S
S
T
T
E
E
M
M
S
S
E
E
L
L
E
E
C
C
T
T
I
I
O
O
N
N
WARNING!
Do not alter or misuse this equipment.
Do not use combinations of components or subsystems
that may affect or interfere with the safe, compatible
function of each other.
Do not expose the equipment to chemicals which may
produce a harmful effect or degrade the equipment.
Consult manufacturer in cases where doubt exists.
Do not use the equipment around moving machinery or
electrical hazards unless specifically designed for such
use.
Do not use the equipment around sharp edges or
abrasive surfaces unless intended for such use.
o
n
K
e
n
t
,
W
A
i
o
n
K
e
n
t
,
W
A
d
d
i
i
a
a
n
n
f
f
a
a
l
l
l
l
.
.
c
c
o
o
m
m
C
C
R
R
I
I
T
T
E
E
R
R
I
I
A
A
:
:
Selection of
person.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 10917 and is the answer not in the manual?

Questions and answers

Summary of Contents for Guardian 10917

  • Page 1 Employees shall be trained in self-rescue or alternate means shall be provided for prompt rescue in the event of a fall. Remove the equipment from service immediately if it has been subjected to the forces of a fall arrest. Contact your distributor or Guardian about policies regarding replacement of Guardian components involved in a fall. •...
  • Page 2: M A I N T E N A N C E , C L E A N I N G , A N D S T O R A G E

    Repairs to equipment can be made only by a Guardian representative or person or entity authorized by Guardian. Contact Guardian for maintenance and repair. Cleaning after use is important for maintaining the safety and life of the equipment. Cleanse the equipment of all dirt, corrosives, and contaminants. If the equipment cannot simply be wiped clean use a mild soap and water.
  • Page 3: Applicable Standards

    Capacity: The SRL is for use by one person with a combined weight (person, clothing, tools, etc.) of 95lbs. minimum and 310lbs. For a Maximum Capacity of 400 lbs. or use over a leading edge, user MUST attach a Guardian 01205R shock absorbing lanyard to the snap hook of this unit.
  • Page 4 Minimize swing falls by working as directly below the anchorage point as possible. In all situations where a swing fall can occur, the likelihood of an injury can occur. Please contact Guardian Fall Protection if you have questions on a particular application involving one of our retractables.
  • Page 5: Cable Inspection

    Crushing: The cable will often get crushed or bent while being used on a job site. Cable that is crushed or bent will damage the retractable and thus the unit should be immediately taken out of service and returned to Guardian or an authorized repair center.
  • Page 6: Installation Requirements

    WARNING! PLAN THE FALL PROTECTION SYSTEM: Before installation plan your system. Consider all factors that will affect your safety during use of this equipment. The following list gives important points to consider when planning your system: Anchorage: Select a rigid anchorage capable of supporting the loads no less than 5,000 lbs. per worker attached. Sharp Edges: Avoid working where system components may be in contact with, or abrade against, unprotected sharp edges.
  • Page 7 IMPORTANT*************FULLY READ AND UNDERSTAND ALL INSTRUCTIONS PRIOR TO USE. PLEASE CALL GUARDIAN FALL PROTECTION AT 800.466.6385 IF YOU HAVE ANY QUESTIONS ABOUT THE USE OF GUARDIAN EDGE RETRACTABLES. GUARDIAN FALL PROTECTION LEADING EDGE STYLE RETRACTABLE SERIES with SHOCK PACK IMPORTANT! models with attached shock absorber pack) …...
  • Page 8 IMPORTANT! MK Web Retractable Series MK CABLE Retractable Series...
  • Page 9 MK Series Instruction Label:...
  • Page 10: Inspection And Maintenance Log

    INSPECTION AND MAINTENANCE LOG: *ALL EDGE RETRACTABLES, EXCLUDING THE 11FT. WEB UNIT, MUST BE SERVICED EVERY TWO YEARS FROM DATE OF FIRST USE. 11FT. WEB RETRACTABLE MUST BE INSPECTED EVERYDAY AS ANY OTHER RETRACTABLE DEVICE. SERIAL NUMBER:______________________(Log unit serial number found on backside of label) MODEL NUMBER:______________________(Model number found on backside of label) DATE PURCHASED:______________________ DATE OF FIRST USE:____________________ INSPECTION DATE:____________ (Mark date of inspection)
  • Page 11 INSPECTION DATE:____________ (Mark date of inspection) INSPECTION ITEMS NOTED: (Refer to inspection guidelines in this manual) CORRECTIVE ACTION TAKEN: _________________________________________ APPROVED BY:____________________________ DATE: ____________ (Who approved inspection and corrective action taken) INSPECTION DATE:____________ (Mark date of inspection) INSPECTION ITEMS NOTED: (Refer to inspection guidelines in this manual) CORRECTIVE ACTION TAKEN: _________________________________________ APPROVED BY:____________________________ DATE: ____________ (Who approved inspection and corrective action taken)
  • Page 12 INSPECTION DATE:____________ (Mark date of inspection) INSPECTION ITEMS NOTED: (Refer to inspection guidelines in this manual) CORRECTIVE ACTION TAKEN: _________________________________________ APPROVED BY:____________________________ DATE: ____________ (Who approved inspection and corrective action taken) INSPECTION DATE:____________ (Mark date of inspection) INSPECTION ITEMS NOTED: (Refer to inspection guidelines in this manual) CORRECTIVE ACTION TAKEN: _________________________________________ APPROVED BY:____________________________ DATE: ____________ (Who approved inspection and corrective action taken)
  • Page 13 INSPECTION DATE:____________ (Mark date of inspection) INSPECTION ITEMS NOTED: (Refer to inspection guidelines in this manual) CORRECTIVE ACTION TAKEN: _________________________________________ APPROVED BY:____________________________ DATE: ____________ (Who approved inspection and corrective action taken) INSPECTION DATE:____________ (Mark date of inspection) INSPECTION ITEMS NOTED: (Refer to inspection guidelines in this manual) CORRECTIVE ACTION TAKEN: _________________________________________ APPROVED BY:____________________________ DATE: ____________ (Who approved inspection and corrective action taken)
  • Page 14 INSPECTION DATE:____________ (Mark date of inspection) INSPECTION ITEMS NOTED: (Refer to inspection guidelines in this manual) CORRECTIVE ACTION TAKEN: _________________________________________ APPROVED BY:____________________________ DATE: ____________ (Who approved inspection and corrective action taken) Mark on the retractable label that the device has been inspected. Failure to do so voids warranty of product.

This manual is also suitable for:

109181092710928109381096410966

Table of Contents