Jetronic-Vx - Firmware Setup - GRAUPNER G-BOOSTER 160 Manual

GRAUPNER G-BOOSTER 160 – Manual 1.91
JETRONIC-Vx – Firmware Setup
SETUP Menu
To enter the SETUP menu for configuring the firmware parameters, first press the SET key and
then use the Up/Down keys to switch between the available parameter sections.
To quit the SETUP menu and to return to the operating status display, press the SET key for
more than 2 seconds (ESC). In the following, the individual submenus of the SETUP menu are
described.
13