Using Saved Loop - PIONEER DJ DDJ-XP2 Operating Instructions Manual

Using Saved Loop

You can save a loop in a loop slot of Serato DJ Pro and call up the
saved loop.
1 Press a Performance Pad (1 through 8) during loop playback.
The loop is assigned to a loop slot of Serato DJ Pro.
• When you press the [PARAMETER ] button or [PARAMETER ] button,
the loop length is halved or doubled by pressing either button.
• When you press the [PARAMETER ] button or [PARAMETER ] button
while holding the [SHIFT] button, the loop is moved without changing the
length. (Loop Shift)
2 Press a Performance Pad (1 to 8) while holding the [SHIFT] button.
The loop set to the pad and loop slot is cleared.
3 Press the same Performance Pad again.
The loop playback is canceled.
Using Manual Loop
You can choose the section you want to loop.
1 Press the Performance Pad 9 during playback or when playback is
paused.
The Loop In point is set.
2 Press the Performance Pad 10.
The Loop Out point is set and the loop playback starts.
• To cancel the loop playback, press the Performance Pad 11.
• To restart the loop playback after canceling, press the Performance Pad 12.
• When you press the [PARAMETER ] button or [PARAMETER ] button,
the loop length is halved or doubled by pressing either button.
• When you press the [PARAMETER ] button or [PARAMETER ] button
while holding the [SHIFT] button, the loop is moved without changing the
length. (Loop Shift)
Serato DJ Pro
67
En