Advanced Use (Serato Dj Pro) - PIONEER DJ DDJ-XP2 Operating Instructions Manual

Advanced use (Serato DJ Pro)

Using 4 Beat Loop
During playback, press the [4 BEAT LOOP] button.
Loop playback starts with 4 beats from the point where you press the
button.
• When the Quantize function is turned on, you might notice a slight
delay due to quantization.
 Canceling loop playback
Press the [4 BEAT LOOP] button again.
Playback continues without returning to the Loop In point.
Using Manual Loop
You can choose the section you want to loop.
• When the Quantize function is turned on, you might notice a slight
delay due to quantization.
1 Press the [1/2X] button while holding the [SHIFT] button at the point
you want to start looping (the Loop In point) during playback.
2 Press the [2X] button while holding the [SHIFT] button at the point
you want to end looping (the Loop Out point) during playback.
The loop playback starts.
 Cutting the loop
Press the [1/2X] button during the loop playback.
Each time you press the button, the loop cuts in half.
• The loop length can be cut in half even during 4 beat loop playback.
Serato DJ Pro
58
En