Using Hot Cues
You can start playback instantly from the position where a Hot Cue is
set.
• Up to 8 Hot Cue points can be set and saved for each track.
1 If the track is playing or paused, press a Performance Pad (1
through 8) to set the Hot Cue point.
The Hot Cue points are set to Performance Pads as follows:
(1) Hot Cue 1, (2) Hot Cue 2, (3) Hot Cue 3, (4) Hot Cue 4,
(5) Hot Cue 5, (6) Hot Cue 6, (7) Hot Cue 7, (8) Hot Cue 8
2 Press a Performance Pad you've set a Hot Cue for.
Playback starts from the Hot Cue point.
• You can clear Hot Cue points by pressing a Performance Pad while holding
the [SHIFT] button.
Using Sampler
You can use the Performance Pads to play tracks or sounds assigned
to the Sampler slots.
1 Select the bank of the sampler on your PC/Mac screen.
The sampler has 4 banks, A, B, C and D, and each bank has 8 slots.
• The selected bank is used for all decks and all pad modes which have the
sampler feature.
(1)
(2)
(3)
(5)
(6)
(7)
60
En
Serato DJ Pro
(4)
(8)