Control Panel; How To Use - Black & Decker DCM2161B Use And Care Book Manual

Control Panel


6:00


B
1. LCD display
Shows:
• Current time of day
• Preset auto brew cycle
2. UTO light (in LCD display): Lights up when auto brew function is activated.
3. Power light: Lights up to indicate that the unit is turned on and the "Keep Hot" plate
is heated.
4. MIN button: Sets desired minutes.
5. UTO button: ctivates the auto brew function.
6. ON/OFF button: Turns the unit on and off.
7. PROG button: Press to select Delayed Brew mode.
8. HOUR button: Sets desired hours.
9. PM light (in LCD display): Lights up to indicate PM hours.




13

How to Use

This product is for household use only.
GETTING ST RTED
1. Remove all packing material, and any stickers from the product.
2. Remove and save literature.
3. Wash all removable parts as instructed in the Care and Cleaning section.
C


D
9. Pull power cord out from power cord holder in back of coffeemaker and plug
into standard electrical outlet.
10. Brew water through appliance following the BREWING COFFEE instructions
without adding coffee grounds. This removes any dust or residue that may
have remained in the coffeemaker during the manufacturing process.
11. When brewing is complete, discard the water from the carafe.
12. Turn off the coffeemaker; unplug it and allow it to cool down.
DJUSTING THE POWER CORD LENGTH
• You can adjust the length of the power cord to suit your needs.
• To increase the length of the power cord, simply grasp the cord (not the plug) in
the rear of the coffeemaker and gently pull down and out of the slot away.
• To decrease the length of the power cord, simply feed any excess cord into the
slot in the rear of the coffeemaker.
• Lift the cord and lock it into the slot when cord is at desired length.
SETTING THE CLOCK
12:00
E
4. Open water reservoir/brew basket cover and pour in
fresh cold water up to the #12-cup level mark.
Caution: Be careful not to exceed the 12-cup maximum
level, to avoid water running out the overflow hole in the
back of the coffeemaker (C).
5. Place the filter into the brew basket with the handle to
the right.
6. Close water reservoir/brew basket cover securely.
7. To replace brew-thru lid cover on empty carafe insert
small hole on left side of cover handle into projection
on carafe cover holder. Press U-shaped projection on
right side of cover handle down to click into position on
right side of cover holder (D).
8. Place empty carafe on the "Keep Hot" plate.
1. Plug appliance into standard electrical outlet.
2. The digital clock display flashes 12:00 (E).
Note: You must set the clock in order to use the Delayed
Brewing feature.
14