Dvd Setup Menu - Nevir NVR-7027TDTG-16N Instruction Manual

7
DVD player

7.5 DVD Setup menu

General setup page
TV display
You can adjust the screen format (aspect ratio) according to the type of TV that you use.
4:3 Panscan: The central section of anamorphic widescreen images is visible on a 4:3 TV,
but the left and right edges are truncated.
4:3 Letterbox: Anamorphic widescreen images are visible in their entirety on a 4:3 TV, but
there are black bands at the top and bottom of the screen.
16:9 : Select this option if you are connecting the player to a widescreen TV. However , you
will not be able to view DVDs recorded in 4:3 as complete 16:9 images even if you select this
option.
Angle Mark:Allow you to enable or disable the Angle Mark function ON or OFF.
OSD Language
Selct your preferred language for the onscreen display and setup menu.
Screen Saver
ON:
If the player remains idle for more than a few minutes, an animated image (known as a
screensaver ) is displayed.
The purpose of this function is to protect your TV screen.
OFF:
If you disable this option, the player will not display the screensaver image.
Note: The player automatically disables the screensaver function during playback.
Last Memory
ON:
Press open button when you watch a DVD, it can play go on to the broken segment if you
close the player.
OFF:
No memory function;
Aduio page
Speaker setup page
Downmix:
The player can mix multichannel audio in order to code it as two-channel audio.
This option is known as " downmixing".
LT/RT:
Dolby Pro Logoc Surround stereo audio output. This matrix-based coding process enables
stereo audio tracks to carry four channels (left, center,right and surround) of audio data.
Stereo:
Analog stereo audio output. The player sends the subwoofer and speech signals to your front
right and front left speakers.
o
36