Nevir NVR-7027TDTG-16N Instruction Manual page 53

2
Functions
2.4 Remote control
Power On/Off
Turing on the TV
1. Plug the TV's power cord into a wall outlet (after this step, the main unit will turn on and
enter standby mode automatically).The power indicator will be Red.
2. Press the (Power) button on the TV ,or press the (Power) button on the remote control.
The TV will turn on.
Placing in Standby Mode
Your TV can be placed in standby mode in order to reduce the power consumption.
The standby mode can be useful when you wish to interrupt viewing temporarily (during a
meal, for example).
1. Press the Power button..
Remark: TV will turn off and the LED turn from Blue to Red.
2. To switch back on ,simply press power button or Remote button.
Remark: Do not leave your TV in Standby mode for long periods of time.(when you are
away on holiday, for example). It is the best to unplug the set from the mains and aerial.
Changing Programs
Using the program selection buttons on the remote control to change programs
1. To select a program, press the corresponding program selection button on the remote
control. For example, to select program 8, press the "8" progam selection button on the
remote control.
2. To select a over 99 program , press the (Program Enter) button
and then enter the program number using the program selection buttons.for example, to
Select program 100, and then press the
Remote control.
Using the / or CH+/- buttons to sequentially change programs
Press / or CH+/- buttons on the remote control or on the TV to sequentially select the TV
program available in your area.
Using the RECALL button to return the previous program
To return to the previous viewed program,press the RECALL button on the remote control.
" 1", "0", "0" program selection buttons on the
10
on the remote control,
o