Basic Operation - Nevir NVR-7027TDTG-16N Instruction Manual

3

Basic operation

To use the TV,be sure to have well inserted the power plug to a mains outlet within
the TV'lated voltage range and to have connected the aerial.
3.1 Basic function
POWER
During TV play,you can press POWER button, TV enters to standby state. When
TV on standby state,press POWER button you can turn on TV.
SLEEP
During TV play,press SLEEP button you can set up the TV auto turn off time.
There are 7 switch modes: Off,15MIN,30MIN,45MIN,60MIN,90MIN, 120MIN,
180MIN.
Source
When TV turns on,press SOURCE button,and press / button to select your
/
desired source, then press to enter.
DISPLAY
TV screen display the current information when DISPLAY button is pressed on any
state. For example,on TV source the program number,program name,color system
and sound system are display.
MUTE
Press MUTE button to mute the sound output.Press it again to restore the sound
output.
P.MODE
You can change between the picture mode presets Standard,Vivid,Soft,Optimal
and User with the P.MODE button.
S.MODE
You can change between the sound mode presets Standard,Music,Speech and
User with the S.MODE button.
NICAM
On TV state,you can press NICAM button to turns on or off others sound tracks and
switch Mono,Dual I,Dual II,STEREO modes.
Number
On TV state,you can press number buttons to directly select channel.
Channel RECALL
On TV state,you can press this button to toggle between the current and previous
channel you were viewing.
Volume
During TV play,you can press / or VOL buttons to increase or decrease volume.
CHANNEL
On TV state,you can press / or CH buttons to select different channels.
o
12