Channel Search; Quick Select - Nevir NVR-7027TDTG-16N Instruction Manual

5
DTV (Digital TV) introduction
5.2 DTV source function instruction
To select program
When the current input is on DTV state,press
MENU button to enter DTV page,before you go
to auto select you should set up AREA,then you
can choose Auto Search item.
Area search is convenient for us to search
channel, it can search all channel points and
programs of the country (area) that you select.
1.Support country(area)
Germany/Italy/France/Spain/Netherlands/Taiwan/China/Norway/Sweden/Finland/Greece/
Australia/Russia/Ireland/Holland/England.
2.TV will auto search all channel point and programs in this country(area) after enter the auto
search page;
3.During TV auto search ,press MENU button to exit this mode;When we got desired and
finished, it can exit this page by itself, then save the program and display.
To quick select program
During DTV play normal,press LIST button on
the remote control, you can directly select
program.
The screen displays as the picture below :You
/
can use buttons to switch program groups.
There are 8 options: None,New,Science,Sports,
Movie,Kids,Music,Fashion.
Favorite Programs in this group will display on
screen, you can use▲/▼buttons to select your
desired option, then press ENTER button to
watch the program.To exit the menu,press
MENU button.
Switching audio and language
During DTV play normal,press AUDIO button to
display Multi Audio page.You can press right or
l e f t b u t t o n s t o c y c l e t h r o u g h t h e
Stereo→Left→Right modes and the audio
language of the current program will show in
center, you can use ▲/▼ buttons to select
l a n g u a g e , t h e n p r e s s E N T E R
confirm.Press MENU button to exit this menu.

CHANNEL SEARCH

S.NO TV CHANNEL
0001 ORF1
0002 ORF2K
0003 ATV
0004 ORF2T
CHANNEL 49 UHF
PROGRESS

QUICK SELECT

GROUP
0001
0002
0003
0004
MULTIAUDIO
MULTIAUDIO
b u t t o n t o
19
S.NO RADIO CHANNEL
698166KHZ/8M
57%
NONE
ORF1
ORF2 K
ATV
ORF1 T
MOVE
STEREO
660 FIN
661 SWE
MOVE
o