S.R.Smith TURBOTWISTER Owner's Manual page 8

TABLE 1
Board Minimum Clearance Area
Pool Type "C" Dimension
I 14' -6" (4420 mm)
II 14' -6" (4420 mm)
III 16' -6" (5029 mm)
IV 18' -6" (5639 mm)
V 21' -0" (6401 mm)
See Article 5 contained in ANSI/APSP/ICC-5 2011 STANDARD
FOR RESIDENTIAL INGROUND SWIMMING POOLS and refer
to FIGURE 3 and Table 1 for Minimum Water Envelope
Dimensions AB, BC and Width at Point C.
"C" DIMENSION FOR BOARD = AB + BC
"W" DIMENSION FOR BOARD = WIDTH AT PT.C
The minimum clearance area of a slide or diving board shall not intersect any coping or rope
C.
and float line as shown in FIGURE E. The minimum clearance area of a slide or diving board
may intersect each other provided that they are not used simultaneously
"W" Dimension
5' -0" (1524 mm)
6' -0" (1829 mm)
6' -0" (1829 mm)
7' -6" (2286 mm)
7' -6" (2286 mm)
FIGURE E
8
FIGURE D