Sony DSC-RX100M7 Help Manual page 538

Help Guide
Digital Still Camera
DSC-RX100M7
Location Info. Link Set.
You can use the application Imaging Edge Mobile to obtain location information from a smartphone that is connected
with your camera using Bluetooth communication. You can record the obtained location information when shooting
images.
Preparation in advance
To use the location information linking function of the camera, the application Imaging Edge Mobile is required.
If " Location Information Linkage" is not displayed on the top page of Imaging Edge Mobile, you need to perform the
following steps beforehand.
1.
Install Imaging Edge Mobile on your smartphone.
You can install Imaging Edge Mobile from the application store of your smartphone. If you have already installed
the application, update it to the latest version.
2.
Transfer a pre-recorded image to your smartphone using the [Send to Smartphone] function of the camera.
After you transfer an image recorded using the camera to your smartphone, "Location Information Linkage" will
appear on the top page of the application.
Operating procedure
: Operations performed on the smartphone
: Operations performed on the camera
1.
: Confirm that the Bluetooth function of your smartphone is activated.
Do not perform the Bluetooth pairing operation on the smartphone setting screen. In steps 2 to 7, the pairing
operation is performed using the camera and the application Imaging Edge Mobile.
If you accidentally perform the pairing operation on the smartphone setting screen in step 1, cancel the pairing
and then perform the pairing operation by following Steps 2 through 7 using the camera and the application
Imaging Edge Mobile.
2.
: On the camera, select MENU →
3.
: On the camera, select MENU →
4.
: Launch Imaging Edge Mobile on your smartphone and tap "Location Information Linkage."
If "Location Information Linkage" is not displayed, follow the steps in "Preparation in advance" above.
5.
: Activate [Location Information Linkage] on the [Location Information Linkage] setting screen of Imaging Edge
Mobile.
6.
: Follow the instructions on the [Location Information Linkage] setting screen of Imaging Edge Mobile, and then
select your camera from the list.
7.
: Select [OK] when a message is displayed on the monitor of the camera.
Pairing of the camera and Imaging Edge Mobile is complete.
(Network) → [Bluetooth Settings] → [Bluetooth Function] → [On].
(Network) → [Bluetooth Settings] → [Pairing].
538