Sony DSC-RX100M7 Help Manual page 198

The product will not adjust the exposure in manual exposure mode when [ISO] is set to other than [ISO AUTO].
3.
MENU → (Camera Settings1) → [Drive Mode] → Select [Continuous Shooting: Hi], [Continuous Shooting:
Mid], or [Continuous Shooting: Lo].
4.
MENU → (Camera Settings1) → [Focus Mode] → [Continuous AF] → Start shooting images.
Hint
If you want to display the timing of shooting on the screen during blackout-free shooting, adjust the setting using MENU →
(Camera Settings2) → [Shoot. Timing Disp.].
To take advantage of the performance of the camera, we recommend that you use an SDHC/SDXC memory card (U3).
Note
When shooting without the shutter sound, do so on your own responsibility, with sufficient consideration to the privacy and portrait
rights of the subject.
Even if you set the camera to shoot without the shutter sound, it will not be completely silent.
Even if you set the camera to shoot without the shutter sound, the aperture and focus will make sounds.
If you set [Audio signals] to [Off], the camera will not beep when the subject comes into focus or when the self-timer is in
operation.
During blackout-free shooting, the slower the shutter speed, the lower the refresh rate of the screen. If you want the screen
display to be smooth in order to track the subject, set a shutter speed faster than 1/60 second.
Related Topic
Shutter Type (still image)
Displaying the release timing (Shoot. Timing Disp.)
Audio signals
Cont. Shooting
Shoot. Start Disp.
5-007-204-11(1) Copyright 2019 Sony Corporation
198