Table of Contents
Advertisement
Quick Links
COMPACT AUTO GUN Operation Manual
Important：Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment.
DESCRIPTION
T2AGPV LVMP gun is a small, light-weight Automatic Compact gun and suitable for robots and automatic machines.
Models and application information follows.
MODELS
Example:
Basic Part Number
Delivery adjustable
A:Adjustable type
B:Fixed type
Body material
6:Aluminum
7:Stainless steel
Paint passage
8:Non-Circulation
9:Circulation
Chart 1
Air Cap
Marking
Part Number
805MT2
AV-1239-805MT2
807MT2
AV-1239-807MT2
T2AGPV LVMP
T2AGPV － A 7 8 － 805MT2 － FX
Fluid Tip Size (mm)
G(0.7)
FX(1.1)
FF(1.4)
FW(1.6)
E(1.8)
G(0.7)
FX(1.1)
FF(1.4)
FW(1.6)
E(1.8)
Fluid Tip(Size)
G :0.7mm
FX :1.1mm
FF :1.4mm
FW :1.6mm
E :1.8mm
Air Cap No.
805MT2
807MT2
Pattern Size Shape
220mm Blunt
280mm Taper
1
Typical Applications
Most conventional materials
Waterborne
Most conventional materials
Waterborne
Advertisement
Table of Contents
Related Manuals for DeVilbiss T2AGPV LVMP Series
Summary of Contents for DeVilbiss T2AGPV LVMP Series
- Page 1 T2AGPV LVMP COMPACT AUTO GUN Operation Manual Important：Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment. DESCRIPTION T2AGPV LVMP gun is a small, light-weight Automatic Compact gun and suitable for robots and automatic machines. Models and application information follows. MODELS Example: T2AGPV －...
- Page 2 Chart 2 Air Cap Tip Marking (mm) Part Number (Tip & Needle Lapped Set) G(0.7) T2AG-440-G 805MT2 FX(1.1) T2AG-440-FX 807MT2 FF(1.4) T2AG-440-FF E(1.8) T2AG-440-E Fluid Tip Needle G(0.7) T2AG-4S-G T2AG-402-FZ 805MT2 FX(1.1) T2AG-4S-FX T2AG-402-FZ 807MT2 FF(1.4) T2AG-4S-FF T2AG-402-FZ FF(1.6) T2AG-4S-FW T2AG-402-FZ...
-
Page 3: Safety Precautions
SAFETY PRECAUTIONS This manual contains important information that ALL users should know and understand BEFORE using this equipment. This information relates to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the following terms to draw your attention to certain equipment labels and portions of this manual. - Page 4 HAZARD CAUSE SAFEGUARDS General Safety Improper operation or maintenance Operators should be given adequate training in may create a hazard. the safe use and maintenance of the equipment (in accordance with the requirements of NFPA-33, Chapter 15 in U.S.). Users must comply with all local and national codes of practice and insurance company requirements governing ventilation, fire precautions, operation,...
-
Page 5: Specifications
SPECIFICATIONS Max. Air Pressure 0.69MPa (7.0kgf/cm Max. Fluid Pressure 0.69MPa (7.0kgf/cm Cylinder Air Pressure Min. 0.34MPa (3.5 kgf/cm Max. 0.49MPa (5.0 kgf/cm Weight 730g (SUS / Adjustable type / Type for Non-Circulation) 336g (Aluminum/Adjustable type / Type for Non-Circulation) Mounting Stud Dia. -
Page 6: Operation
Figure 2. Installation Mount the gun with the stud (Ø19) or tighten with Manifold (14) 8.2mm whole. CAUTION: The air supplied to the gun should be clean air that removed any impurities. OPERATION 1. Mix, prepare and strain the coating material to be sprayed according to paint manufacturer’s instructions. 2. - Page 7 REPLACEMENT Tools Required Crescent Wrench 10mm or 13mm Box Wrench Pliers (for Needle Assy) Open Wrench Hex Wrench Fluid Tip (5) 1. Relieve all air and fluid pressure in system. 2. Remove Rear Body (10or11), Needle Spring (9). Pull Needle Assy (8) out from gun body with Pliers. 3.
- Page 8 Item No. Part Number Description Q’ty Remarks T2AG-368 Retaining Ring with Cap Seat and Ring Gasket T2AG-50-K5 Cap Seat 5 pieces Gasket T2AG-55-K5 Ring 5 pieces Refer to Chart1 Air Cap Refer to Chart2 Fluid Tip T2AG-10 Needle Seal Kit T2AG-102 Piston Seal Refer to Chart2...
-
Page 9: Service Check
SERVICE CHECK Normal spray pattern The proper combination of fluid pressure, fan and atomization air pressure, and fluid tip size should result in a pattern of this shape. Problem Cause Correction Will not spray. No pressure to gun. Check air and material lines. Piston stops moving.