Advertisement
11. Remove the hinge clip (1) by pulling it towards the
right, away from the lid hinge spindle (2).
13. Manually push the print head to the far left and
feed the cartridges and tubes as shown.
Push the print head as far to the right as possible.
15.
12. Now remove the print head lid.
14. Place the cartridges into the cartridge housing
and press them down firmly.
Important: ENSURE THAT EACH
CARTRIDGE HAS LOUDLY CLICKED INTO
PLACE.
16. Remove the adhesive backing tape and attach the
metal tube support so that the right edge of the
bracket is 40mm from the edge of the printer
housing as shown.
Advertisement
