Advertisement
Note:
When you turn the press on it
displays 93° C until such time as the
heat press temperature exceeds this
temperature as it warms up to the
temperature you have set.
IMPORTANT:
The press will not
function when the (SET) Light is
illuminated. This light indicates that you
are in the Adjust Temperature or Time
Mode not the Print Mode.
►
press should be placed on a sturdy suitable stand at least 36"L x 24"W x 29"H.
The
►
Power supply cord must be disconnected before cleaning or servicing press.
►
The heat press operates at high temperatures.
which can be sustained by touching the heated platen during use.
►
Keep hands clear from the platens of the press during platen lock down as the pressure
can cause injury.
►
It is recommended that students should not operate the heat press unattended.
►When the press is turned off it takes approx 30 minutes to cool down. It is recommended
'Caution Hot'
that a
sign is displayed on the press or that a guard
is placed around the press.
Locate the LED Display.
Press the mode select button located in the
center of the control panel. The SET) and
(TEMP) lights located next to the display will
illuminate indicating you are in the adjust
temperature mode.
Next, press the (-) button located to the left of
the mode select button to lower the
temperature setting, or press the (+) button
located to the right of the mode select button to
raise the temperature setting.
The temperature can be set from 205 F (96 C)
to 430 F (221 C).
Once you have completed adjusting the
temperature press the mode select button
again. This will advance you to the Adjust Time
Mode. The (SET) and (TIME) lights will
illuminate, indicating you are in the adjust time
mode.
Adjust the time by pressing the (-) button
located to the left of the mode select button to
reduce the time setting, or press the (+) button
located to the right of the mode select button to
increase the time setting. The time can be set
from 001 to 999 seconds.
To exit the Adjust Temperature and Time
Modes press the Mode Select Button a
third time. All lights will be off and the press will
return to the Print Mode.
IMPORTANT HEALTH & SAFETY NOTICES
Setting the Temperature
Setting the Time
Pay particular attention to the risk of burns
Advertisement
