Setting Up Screen Call - Sanyo M1 User Manual

Setting Up Screen Call

This feature enables you to screen incoming calls by using a
recorded announcement, either one that is prerecorded or
one that you have recorded. You can also record the caller's
message into the Voice Data list.
Activating Screen Call
To start Screen Call when you have incoming calls:
When the phone rings or vibrates, select Options (right
softkey) > Screen Call.
To set Auto Screen Call:
1.
Select
2.
Select On and press
3.
Set the answering time by using numeric keys or by
pressing the navigation key up or down.
4.
Select OK (left softkey). (The
standby display.)
Tip:
While the caller's message is being recorded, press TALK to
answer the call, or press END to stop recording and disconnect
the call.
Selecting an Announcement for Screen Call
To select a Screen Call announcement:
1.
Select
Announcement.
2.
Select Pre-Recorded or Custom and press
Section 2H: Using Your Phone's Voice Services
> Tools > Voice Services > Screen Call > Auto.
.
> Tools > Voice Services > Screen Call >
icon is displayed on the
.
149